Hayling Island picnic

It was about time we took the van for a blast down the motorway if only to get the tyres turning and the oil pumping around the engine, so we settled on a picnic on the seafront at Hayling Island. There was a stiff cold breeze blowing, but it was nice and sunny. Our first selection of a parking place was on too much of a slope which made it awkward to walk around in the van, so we put our food away and moved about a quarter of a mile further along the sea front.

Once we had found a nice level space we turned on the gas, boiled the kettle  and settled down for a mug of tea. There was no need to turn on the van’s heating as the sun shining through the windscreen warmed us up nicely.

Hayling Island at the sea front

Here we are parked nice and level. We spent an hour or so enjoying the view and enjoying our lunch before heading home for dinner. Hayling sea front is a nice quiet place in the winter, it’s ideal for a long walk along the beach and what’s more – the parking is free in winter!.

Here is the view we enjoyed while relaxing over lunch.

The beach at Hayling Island

More on the RPi printserver

The printserver as initially set up used my old RPi model B, the original RPi that only has an RJ45 ethernet connection so I had to connect the printserver to the network router using a network cable. This was a real limitation as it meant that I had to co-locate my printer and router.

Looking on Pimoroni’s web site I saw that they were selling the new RPi model 0W for about £9.60. The 0W model has built-in wi-fi and bluetooth, and is about half the size of the model B. With the built-in wifi configured, I could put the printserver anywhere I wanted (as long as it’s in wi-fi range) with no external hard wired network connection.

The photo below shows how small the RPi is against a collection of coins (note the Kitchener £2 and Beatrix Potter 50p coins, nice).

RPI 0W

Configuring the RPi was simple. I had to create a new kernel build for the board, set up the wi-fi configuration files and all the printer bits as before, and then let Buildroot do all the hard work.

Needless to say it all worked perfectly.  As you can see in the photo, there are two connections to the RPI, one is for power from the printer USB input port, the other is the output to drive the printer. Simples…eh?

Devizes again

We wanted to get away for a long weekend but with most of the UK campsites closed for the winter there are relatively few places to go. Last winter we thoroughly enjoyed the few days we spent at the campsite at Seend, near to Devizes, and so decided to book a pitch for Sunday to Wednesday 26th-29th November. Thankfully, Steve and Laura  agreed to look after the cat for the duration so we packed up, filled up with LPG,  refuelled and set off early on the Sunday afternoon.

The outward bound journey was uneventful and within 2 hours of leaving the house we had parked up, plugged in, and were taking a stroll along the Kennet & Avon canal in the fading light of the afternoon and stopped to watch the mumerations of starlings.

Starlings

The weather forecast for the Monday was mediocre at best which gave us the excuse to take the early bus to Bath rather than walk to Devizes. The Bath Christmas market was in full swing so we meandered around from stall to stall while trying not to spend too much. We also had a good wander around the shops and escaped from the city before the evening rush hour started. Back to the van for a freshen-up and then over to the Three Magpies pub for our evening meal with some of the Waddingtons local brew for refreshment.

Seend is about 3 miles from Devizes, which takes a good hour and a bit to walk but is less than 15 minutes at most by bus. The canal tow path along along the canal goes along the spectacular Caen Hill lock system; a system of 29 locks extending over a 2 mile stretch. It was difficult getting decent photos of the lock system, I guess the best way would be to use a drone flying high above.

It’s uphill to Devizes and downhill on the return journey, however on this visit after lunching and wandering around Devizes for a few hours we caught the bus back to the campsite.

We had intended to use our bikes to cycle along the tow path to Bradford-on-Avon but ran out of time. Maybe we will come back here at some point in the future.

Raspberry PI print server

I’ve wanted to sort out our home printing set-up for some time. We have a Canon printer which is connected via a USB cable to our desktop PC so whenever we want to print from the Mac we have to boot up the desktop. Our printer is not a network print server.
I’ve owned a RaspberryPi model ‘B’ since they were first sold, but had done precious little with it. It’s too low powered to be used as a real desktop and to use it so I would have to have another screen, mouse etc.
There is a really useful toolset called ‘Buildroot’ which allows a user on a Linux system to cross-compile and build a customised and very small  boot image for a very small computer, such as the Pi, so I downloaded the tools and played around to see what it could do.
There are some excellent tutorials on embedded Linux and Buildroot on the free-electrons web site which I pored over for many hours and after some playing managed to configure ‘Buildroot’ to build a dedicated printserver to run on the PI and offer printing to the other computers in our home network. The boot image is less than 150Mb so fits easily on a 256Mb SD card.

The Pi is now powered by the printer so when we switch the printer on, the PI automatically loads up and makes the printer available on our home network.

Here is the PI in its multi-coloured case, note it’s not much bigger than a credit card as can be seen below.

Raspberry Pi Model B, the original RPI

Raspberry PI computers are just brilliant. They retail from just under £10 and run Linux. Using Buildroot, you can create super low cost dedicated devices such as print servers, DNS servers, etc etc that attach to your home wireless networks. Just brilliant!.,

Here is what I did to make it all work:

  1. Download Buildroot to my Linux desktop and produce a configuration for the PI:
    1. mkdir piB; cd piB;
    2. ln -s ~/’buildroot directory‘ buildroot
    3. make -C ../buildroot O=$(PWD) raspberrypi_defconfig to create the default configuration for the Raspberry Pi model B.
  2. Modify the configuration to point to overlays, user table, patch, post-build, post-image directories
  3. Enable udev, dropbear, busybox, tinyhttpd, p910nd, kmod,
  4. Modify config nodename.
  5. Create overlay files for fixed IP address, printer startup, modules-load.d to enable usblp.
  6. Modify the printer startup script (S90printer in my case) to create the lock directory /tmp/lock/subsys
  7. Remove all the unnecessary graphics, sound etc stuff found in the default configuration.
  8. Build the config using make.
  9. Copy the configuration to SD card using ‘dd‘ with something like:sudo dd if=images/sdcard.img of=/dev/sdh ; sync ; sync
  10. Put the SD card in the PI and power it up.

Then, set up printing from the client computers. The PI printserver uses p910nd to listen on the network for print requests. Clients should access it at: socket://IPADDRESS:9100. To make this all work from the Mac I had to load the Gutenberg Canon printer drivers onto the Mac as the standard Apple Canon drivers do not work across sockets.

Loads of good info on p910 can be found at p910nd

It all works a treat.

MOT successes

Well,it’s time to put Elsie through her first MOT, thereby keeping our chums at DVLA happy. The MOT due date was 2nd October but we thought we’d get it done a few days early to give us time for any remedial work, should any be needed. Oh Ye of little faith…..

Having spoken to the people from Spitfire Garage of Woolston, Southampton, at the Caravan and Camping show in Romsey a few weekends ago, they enticed us by offering a generous 20% discount on the MOT cost, so we booked in for the morning of Tuesday, 26th September.

Finding Spitfire garage was easy enough,in fact we somehow arrived 30 mins early. There was a constant stream of HGVs coming and going, and lots of building work in the vicinity, so we had to carefully choose a parking spot, where we’d cause the least inconvenience- Elsie’s not up to fighting HGVs. After a short but stressful wait parked up, Spitfire were ready to do the MOT.

Fiona and I wandered off into Woolston. Within a few minutes we found Annie’s Cafe on Portsmouth Road and went in for a sit down. Annie’s was a real find; a spotless cafe where a mug of tea and a mug of coffee cost an amazing £1.60. We quite fancied the full English breakfast with toast, being enjoyed by the guy at the next table. That came in at around £4. Maybe next time, we’ll splash out on breakfast.

We returned to Spitfire Garage within the hour to be told that the van had passed its MOT and they were just finishing off the paperwork, and yes, the bill took into account the 20% discount.

All in all, great service from Spitfire and at Annie’s, so we’ll definitely use them both again.

The A3 was also due an MOT in October, however, on her arrival home from work on Thursday evening, Fiona invited me to hear the grinding noise that was coming from the rear end. The off-side rear brake caliper had seized. Bugger! I managed to get it loose by bouncing it over a small kerb, but the car was not really driveable over any distance in its current condition.

A call to Locks Heath garage early on Friday morning had us leaving the car with them for the day during which time they fitted new rear brake discs and pads and replaced the faulty caliper- we were back on the road again by late afternoon.  When I collected the car, they offered to take it back on the following morning for its annual MOT, which thankfully it passed.
Next garage job? To sort out some niggles on Fiona’s MX-5. Then maybe decide whether we really need 3 vehicles.

 

 

Weyfest – one off the bucket list

Neither of us had ever been to a multi-day music festival and we both had put attendance at one on our “bucket lists”. We had  missed the Wickham festival in early August, which was a real shame as it was close to home. Fiona spotted the Weyfest festival advertised and after checking the line up and the location we decided to buy tickets. Weyfest is held outside the village of Tilford in Surrey, which is about an hour away. Despite it being “out of county” we bought the various tickets, loaded our stuff into the ‘van, including  sufficient food and alcohol, topped up with clean water and headed off up the A3M on Friday morning, arriving at Tilford shortly after midday.

We had decided against paying for electric hookup (£36 for 3 nights! ) preferring to  rely on our leisure battery having sufficient charge to last the 3 days.

The campervan/motorhome park was no more than 200 metres from the main stage so we could sit out in the sunshine and still hear headline music from our camping pitch.

Weyfest is held at the Museum of Rural Life, which was a bit of a find in itself. Lots to visit there, including a prefab house, with all original fixtures and fittings. The museum also has some fascinating collections of craftsmens’ tools from a bygone age. We each noticed a resemblance to our Dads’ sheds/ garages. A real piece of nostalgia there. Also, there were modern day craftspeople, demonstrating spinning, and needlework. Not quite rural life, but there was a also a Dr Who exhibition which included real Daleks and Cyber men, as well as other props. Oh, and there is a small railway, which runs round the site- we of course had a ride on that.

Friday afternoon saw us take a wander around the venue to get our bearings and we had some tasty Nepalese curry from a stall. Later, we enjoyed the sounds of Mike Sanchez. After a break back at the van, we strolled  back to  watch and hear the music of Jeramiah Ferrari and finally some sounds of the 80’s when the Buzzcocks blasted out their repertoire.

The Buzzcocks were so loud that I don’t think I could hear properly until the following morning. I was beginning to wish that I had brought ear defenders or earplugs to protect my hearing.

Saturday morning was nice and dry, and  after enjoying a cooked breakfast in the morning sunshine we lazed around until 11:30 or so for the music to start. There were 4 stages all running concurrently, each with a different genre of music so there was plenty to choose from.  We spent a fair bit of time at the ‘Old Kiln’ stage, which offered music of a laid-back variety.

Harry Baker knocked out a number of soul/funk/chillout numbers. He was excellent and we thoroughly enjoyed his set.

Mid afternoon saw us head towards the main arena. Eddie and the Hot Rods were due on stage at 14:30 and we’d decided to give them a go.

Blooming excellent!

Eddie etc were superb. They were on stage for over an hour and really had the crowd dancing. Good to see a band who clearly still love performing. ‘Do anything you want to do’…..

Brilliant!

From the comfort of the van we heard ‘Inglorius’ and ‘Brother Strut’ as we ate our dinner, a fine pre-prepared chicken curry, which was accompanied by a superb rose wine from the Carr Taylor vineyard that we visited back in July.

Saturday evening – this is the one I had come for: Alison Moyet!. And she didn’t disappoint. She really belted out those old Yazoo hits and many of her later solo hits as well as some new material.

An hour and a half of Alison Moyet. She started with one of my favourites “Nobody’s Diary” and it got even better from there.

I could have listened to her all night. Superb!

The sky was lovely and clear on Saturday night and the temperature plummeted;  it was freezing out in the countryside. We woke to a clear blue sky but rain was forecast for the evening.

The Sunday line-up included Ralph McTell and Jools Holland and numerous other acts that we would try and see.

We headed back over to the arena in the early afternoon after a cooked brunch. The acts playing on the Old Kiln stage again impressed us with performances from ‘Cousin Avi’ (funk/soul/pop) and ‘Jungle Brew'(ska/funk/swing/latin) after which we headed back to the main stage to listen to Ralph McTell.

Ralph played a number of his songs from the 70’s including ‘Streets of London’. By now the rain had started and brollies were being deployed as seen in the photo.

After Ralph, it was back to the van for a chilli con carne and more wine while listening to Hayseed Dixie from afar, and then back to the Old Kiln stage to listen to ‘Gilmore and Roberts’ (contemporary folk/acoustic).  It was hard pulling ourselves away from this group so we stayed for their finale and then rushed over to catch the start of Jools Holland.

Jools and his orchestra were sheltered from the cold rain, unlike the rest of us. Hmmm, I’m not into boogie -woogie music but Fiona was really enjoying herself.

By now the rain was torrential and only God knows how many hundreds of people stood in the downpoor for 90 minutes listening to Jools with his Rhythm and Blues orchestra and guests including Chris Difford from Squeeze, and Ruby Turner.

It continued to rain until the early hours of the following morning. Hundreds of cars, vans etc leaving the grassy field parking,  together with inches of rain,  equals loads of soft, slippery mud. On my way back from the shower block I spied a MoHo slipping around in the mud, unable to gain traction to leave the field and thought “I hope that doesn’t happen to us”. Bugger, it did happen to us. Embarrassingly, we had to be pushed out of the mud. Grateful thanks to our fellow campers for that one.

So, our first music festival, and we chose a good one. A great atmosphere, lots to do and see, as if the music wasn’t enough. Weyfest has been running since 2007, and there are many return visitors. Lots of people wore t-shirts from previous Weyfests….that moment when you think “ooh, I’d love to see them live!”…oh well, we’ll be waiting to see next years’ line-up, hopefully we’ll be back.

Fitting a USB socket in the motorhome

Our ‘van is a 2014 model and brilliant though it is, one thing it lacked was USB sockets and we need plenty of those to charge our phones, tablets, iPod and the 4G mobile broadband modem. The cab area does have two 12 volt sockets, but these only function when the van ignition is switched on. There are no dedicated USB sockets in the habitation area. We do have some mains to USB adapters, but these are only useful when we are hooked up to a mains electric supply. There are two USB outlets on the satellite TV unit and we have been using these to power the Chromecast and  the bluetooth speaker.

So I decided to install some additional USB power outlets.

The TV runs on a 10A circuit but really only draws around 2A maximum so I decided to extend the TV circuit rather than wire in a new circuit. A double USB socket can draw up to 3A at 5V, so doesn’t use too much  on the 12V circuit.

I got the necessary components from 12 Volt Planet and set about installing a double USB socket and an isolating switch with a fuse so that it can be switched off in the event of any problems. The van’s ‘tech’ cupboard already contains the Satellite TV box and has a blanking panel at the back to hide the excess cable. I decided to fit the USB socket and the switch onto this panel.

It’s now wired so that I can easily add another double USB socket if need be. It’s fused  with a 3A fuse to be on the safe side. Now all I have to do is connect it to the van’s 12volt TV circuit. Simple eh?

Having removed the panel and drilled the holes, I then cut and crimped the wires while enjoying some afternoon sun in the garden.

Final product, in place and switched on, glowing nicely.

Proper USB charging

As this was quite a simple task, I now plan to install a few more USB sockets on the passenger side of the van, but next time I will install a new circuit rather than piggyback off an existing one.

A day out in Winchester

Well, its off to Winchester for a cheap day out. We have a giftcard for lunch, valid tickets for a visit to the Cathedral and  the park and ride is only £2.50 after 10am.

Our lunch  is courtesy of Sheena and Stuart Brennan who, a couple of Christmas’s ago, gave us a giftcard for Rick Stein’s restaurant chain which luckily has a branch in Winchester.

The bus journey from the park and ride took about 15 minutes. Our lunch table was reserved for 2pm so we had an hour to kill. Having visited the cathedral last August, our tickets gave us unlimited access for 12 months. I really begrudge giving money to any church so it was time to use those tickets again and get more of my money’s worth.

The cathedral is a marvel of medieval architecture and craftmanship, as well as 19th and 20th century maintenance. There has been a cathedral on this site in Winchester since the year 640. The current cathedral dates from the 11th century has the longest nave and greatest overall length of any Gothic cathedral in Europe. Ah, the treasures on your own doorstep. God no longer lives here as he was evicted during reformation back in the 16th century, but there are still traces of him around the building.

A view along the nave of the magnificent Winchester Cathedral

Visiting on a Monday was a good idea as there were relatively few visitors. Here is a photo of the nave looking towards the altar and choir. Note the tall vaulted roof. The aisle is replete with old gravestones and grave covers many dating from the 17th century.

Here is a gallery of the photos we took during our visit:

Once we had  the cultural stuff out of the way, we headed off to the Rick Stein restaurant for lunch. As it was ‘Rick’s place’ (not that one) we really had to choose fish and both started with the Amritsari fish starter which was white fish with a delicate spicy batter..truly melt in the mouth! For mains, Fiona chose the prawn dish, a mild prawn masala. I chose the hake. Again, both were delicious.

Many thanks to Sheena and Stuart for the giftcard.

Empty plates and soon to be empty glasses. Follow this with ice cream and lemon posset and wander around the cathedral again to walk off the alcohol before heading back to the P&R and the drive home.

All in all, an excellent day out.